Advanced Materials, Structures and Mechanical Engineering
-10%
portes grátis
Advanced Materials, Structures and Mechanical Engineering
Proceedings of the International Conference on Advanced Materials, Structures and Mechanical Engineering, Incheon, South
Kaloop, Mosbeh (Department of Civel & Environmental Engineering, Incheon National University, Incheon, South Korea)
Taylor & Francis Ltd
04/2016
406
Dura
Inglês
9781138027930
15 a 20 dias
Descrição não disponível.
Soap film Enneper model in structure engineering H.M. Yee & N.A.H. Mohd Hencky bar-chain model for buckling and vibration of beams with elastically restrained ends H. Zhang, C.M. Wang & N. Challamel Application of the ball indentation technique to study the tensile properties across the P92 steel weld joint D.R. Barbadikar, A.R. Ballal, D.R. Peshwe, T. Sakthivel & M.D. Mathew The continuum model considering the drivers' anticipation effect C.Y. Yu, R.J. Cheng & H.Q. Liu Fire resistance of fiber reinforced Concrete Filled Box Columns C.W. Tang, H.W. Liao, H.J. Chen & K.C. Jane Theoretical and experimental comparative study of strains acting on the hub fork of a cardan joint I. Bondrea & E. Avrigean Experimental investigation of residual stress in the micro-grinding of maraging steel Z. Ding, B. Li, P. Zou, J. Yang & S.Y. Liang Flutter analysis of rotating missile's variable cross-section empennage by differential quadrature method D. Horak Influence of polypropylene waste carpet fiber on deformation characteristics of concrete M.H. Hossein, A.S.M. Abdul Awal & A.A.K. Mariyana Constructions from wood for a power-effective and eco-friendly real estate A.M. Krygina & N.M. Krygina Study of the numerical calculation model of the sporting rifle C. Xu & G.Q. Liu Finite element parameterized modeling of projectiles penetrating gelatin and the development of a simulation system S.S. Liu, C. Xu & A.J. Chen Dynamic responses of long-span cable-stayed bridges under multi-line railway trains P. Yang, X.T. Si, K.J. Chen & W.H. Guo Multiple Tuned Mass Dampers for wind-excited tall building Y.M. Kim, K.P. You, S.Y. Paek & B.H. Nam Influence of laser radiation on structure and properties of steel O.V. Lobankova, I.Y. Zykov, A.G. Melnikov & S.B. Turanov Comparison of concentration profile prediction for slurry transportation based on the diffusion theory L.J. Zhao CFG compound foundation in high-rise building design and application J.Z. Li, G.X. Fang & Q. Quan Design and construction of pile tip and pile lateral bored grouting X. Zhou, G.X. Fang, P. Zhang & Y.Q. Leng An approach for road region detection H. Fang, G.Q. Yang, J. Li, G.T. Shao, C.Y. Zhang & C.G. Fu A university e-learning system to enhance higher education teaching environments: A model-based innovative service-oriented clouds intensive evolution approach L. Wang & Z. Wang Coupled multiscale nonlinear dynamic analyses of Reinforced Concrete Shear Wall buildings I. Cho, S. Yemmaleni & I. Song Influence of river level fluctuation on the stability of high floodplains bank slope G.L. Tao, B.Z. Tan, J.Y. Fan, J. Ruan & Z.S. Yao Scour protection of the foundations of Offshore Wind Energy Converters V. Efimova, A. Karelov, A. Nesterov & N. Belyaev Vector field modeling of seismic soil movement in building footing Z. Tatiana & S. Pavel The effect of ocean flow on reconstruction accuracy in the test based on the NAH Q.W. He, P. Hu, X.W. Liu & S.C. Ding Effect of different modification methods on ground motions C.W. Jiang & D.B. Wang The effects of the effective support length of the stern bearing on ship shafting vibration transmission paths H.F. Li, Q.C. Yang, S.J. Zhu & X.W. Liu Development of a water-collecting device for collecting water at a certain depth Y.H. Chen, Y.P. Xu, J.B. Jiang, Z.T. Ni & X.L. Li An empirical analysis of the influence of international oil price's fluctuations on the exchange rate of RMB J. Deng & J.Q. He LQR control of seismic-excited tall building with ATMD Y.M. Kim, K.P. You, J.Y. You & D.K. Kim Use of nonconventional liquid fuel in heat power industry A. Lesnykh & K. Tcoy Economic evaluation of hydroconversion of fatty acid methyl ester into renewable liquid hydrocarbons A. Kantama, P. Narataruksa, C. Prapainainar & P. Hunpinyo DEM investigation of stress field in sand during pile penetration S. Liu & J. Wang The water saturation effects on dynamic tensile strength in red and buff sandstones studied with Split Hopkinson Pressure Bar (SHPB) E.H. Kim & D.B.M. de Oliveira Economic potential of diesel-like renewable fuel production from the by-product of the palm oil refining process A. Kantama, C. Prapainainar, P. Narataruksa & P. Hunpinyo Study on acoustic similarity in different fluids M. Wang, Q.D. Zhou, Y.F. Wang, G. Ji, J.B. Xie & Z.Y. Xie Influence of soil temperature conditions on linear construction stability E.E. Kholoden, S.A. Lobanov & O.M. Morina The effects of KH560 addition on brittle/ductile properties of glass fiber/epoxy resin composites J.S. Sun & J.G. Wang In vitro bioactivity evaluation of Co-Cr-Mo (F-75)/HAP composites N.M.S. Adzali, S.B. Jamaludin & M.N. Derman Formation of nanostructured Ti-Ni-Hf-Cu coatings by high-speed flame spraying of mechanically activated powders P.O. Rusinov & Zh.M. Blednova Synthesis of pure zeolite NaP from kaolin and enhancement of crystallization rate by sodium fluoride J.T. Li, X. Zeng, R.Y. Chen, X.B. Yang & X.T. Luo Formation of copper oxide nanostructures by solution-phase method for antibacterial application C.M. Pelicano, J.C. Felizco & M.D. Balela A method of load extrapolation based on the MCMC and POT S. You, Y.Q. Wu, Y. Li & Y.S. Zhang A planar four-bar mechanism demonstrator with variable bar length and connecting rod curve drawing L.N. Gao, H.Y. Tang & C. Yang Influence of dynamic force on the vibration of the micro-machine tool spindle M. Guo, B. Li, J. Yang & S.Y. Liang Research of the IEEE802.11a channel coding technology based on Turbo code Z.Y. Sun, L.Y. Liu & Y. Zhang Stability analysis of single-layer hyperbolic shallow lattice shell with different grid reinforcements Z.Y. Zhang, H.Y. Wei, X. Zhao & X. Qin Extending stress linearization procedures for direct method design in pressure vessel design H.J. Li, X. Huang & H. Yang Statistical description of fracture pattern from single particle crushing test B. Zhao, J. Wang & H. Zhao Channel allocation algorithm in multi-hop cellular network based on potential game Z.Y. Sun, Y. Zhang & L.Y. Liu Electroosmotic flow through a microchannel containing salt-free power-law fluids S.H. Chang Electrochemical study of Cu nanowire growth in aqueous solution J.C. Felizco & M.D. Balela Effects of synthesis techniques and initial reagents on compositions and particle morphology of hydroxyapatite O. Jongprateep & C. Nueangjumnong Synthesis and characterization of Fe-Sn nanoparticles via the galvanic replacement method E.R. Magdaluyo Jr., A.L. Bachiller & P.J. Nisay Numerical study of micro-reactor inlet geometry for Fischer-Tropsch Synthesis W. Chaiwang, A. Theampetch, P. Narataruksa & C. Prapainainar The efficiency of improving the blade finishing treatment M. Yu Kulikov, V.E. Inozemtsev, A.A. Bocharov & N.O. Myo Study on the hyperbolic sine function creep model H. Chen, H.D. Jiang & H.Y. Chen The calculation and decomposition of embodied energy in Sino-Korean trade: Based on technological heterogeneity X. Zhang & W.R. Huang Design of software for orthogonal packing problems V.A. Chekanin & A.V. Chekanin Flow-induced noise analysis of pipes with variable cross-sections W. Zhao, Y.O. Zhang & Z.L. Guo Study and simulation on impact of wind turbine generators on Low Frequency Oscillations in power system J.R. Xu, F. Tang, Q. Zhang, T. Zhao & Q.X. Wang EMD-based event analysis for identifying the influence of the "2008 Financial Crisis" on silver price L. Chao & S. Yu Evaluation of metallurgical parameters of Brazilian lump iron ores with three distinct typologies J.J. Mendes, A.A. Cunha, F.G. da S. Araujo, F.L. von Kruger & R.A. Llobell Sole The issue of balancing of eccentric-type vibrators I.M. Yefremov, D.V. Lobanov & K.N. Figura Comparison between the effects of thoracoscopy and open thoracotomy on elderly patients with lung cancer F.W. Lin, K.P. Cheng, C. Zhang & Y. Zhao Territory of mining-industrial development as an object of recreation in the Far East federal region L.T. Krupskaya, V.P. Zvereva, A.V. Leonenko & N.G. Volobueva Validation of a temperature parameter in the expression for the efficiency of filtering magnetophoresis A.A. Sandulyak, D.A. Sandulyak, M.V. Shitikova, Y.A. Rossikhin, A.V. Sandulyak & V.S. Semenov Multi-focus fusion with a new sharpness parameter for textile testing J.F. Zhou & R.W. Wang A novel three-dimensional reconstruction algorithms for nonwoven fabrics based on sequential two-dimensional images L.J. Yu & R.W. Wang The effect of volume variation of silver nanoparticle solution towards the porosity and compressive strength of mortar H.S.A. Tina, A. Andreyani & W.S.B. Dwandaru Design and implementation of reversible DC speed control system with logic non circulating current L.N. Gao & S.Q. Yi Effect of the plain-woven fabrics on mechanical properties of composites S. Tanpichai, K. Kaew-in & P. Potiyaraj Reactively modified poly(butylene succinate) as a compatibilizer for PBS composites V. Tansiri & P. Potiyaraj Preparation and characterization of Ag-Bi1.5Y0.3Sm0.2O3 composite cathode C.H. Hua & C.C. Chou Formation of silver nanowires in ethylene glycol for transparent conducting electrodes N. De Guzman & M.D. Balela Study on the wave-truss composite bridge design Y. Li, C.L. Zhu & X.X. Zha The transient stability analysis based on WAMS and online admittance parameter identification H.Z. Zhou, F. Tang, J. Jia & S.L. Ye Polymer composites with ferrocene derivatives for fire-safe construction A.A. Askadsky, V.A. Ushkov & V.A. Smirnov Weight optimized main landing gears for UAV under impact loading for evaluation of explicit dynamics study R.F. Swati, A.A. Khan & L.H. Wen Analysis of the influence factors of carbon emissions based on the LMDI approach-taking Jiangsu Province as an example X.Y. Wang & S.Y. Jiang Impedance characteristics of laboratory scale molten carbonate fuel cell fueled by ash free coal S.W. Lee, T.K. Kim, Y.J. Kim, C.G. Lee & M. Wolowicz Purification of plasmid DNA from Escherichia coli lysate using superparamagnetic nanoparticles modified with amino functional groups X.L. Qiu, Y.P. Guan, K.K. Wang & C. Guo Nanomodified bitumen composites: Solvation shells and rheology E.V. Korolev, S.S. Inozemtcev & V.A. Smirnov Effects of the multi-step ausforming process on the microstructure evolution of nanobainite steel C. Zhi, A. Zhao, J. He, H. Yang & L. Qi
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Soap film Enneper model in structure engineering H.M. Yee & N.A.H. Mohd Hencky bar-chain model for buckling and vibration of beams with elastically restrained ends H. Zhang, C.M. Wang & N. Challamel Application of the ball indentation technique to study the tensile properties across the P92 steel weld joint D.R. Barbadikar, A.R. Ballal, D.R. Peshwe, T. Sakthivel & M.D. Mathew The continuum model considering the drivers' anticipation effect C.Y. Yu, R.J. Cheng & H.Q. Liu Fire resistance of fiber reinforced Concrete Filled Box Columns C.W. Tang, H.W. Liao, H.J. Chen & K.C. Jane Theoretical and experimental comparative study of strains acting on the hub fork of a cardan joint I. Bondrea & E. Avrigean Experimental investigation of residual stress in the micro-grinding of maraging steel Z. Ding, B. Li, P. Zou, J. Yang & S.Y. Liang Flutter analysis of rotating missile's variable cross-section empennage by differential quadrature method D. Horak Influence of polypropylene waste carpet fiber on deformation characteristics of concrete M.H. Hossein, A.S.M. Abdul Awal & A.A.K. Mariyana Constructions from wood for a power-effective and eco-friendly real estate A.M. Krygina & N.M. Krygina Study of the numerical calculation model of the sporting rifle C. Xu & G.Q. Liu Finite element parameterized modeling of projectiles penetrating gelatin and the development of a simulation system S.S. Liu, C. Xu & A.J. Chen Dynamic responses of long-span cable-stayed bridges under multi-line railway trains P. Yang, X.T. Si, K.J. Chen & W.H. Guo Multiple Tuned Mass Dampers for wind-excited tall building Y.M. Kim, K.P. You, S.Y. Paek & B.H. Nam Influence of laser radiation on structure and properties of steel O.V. Lobankova, I.Y. Zykov, A.G. Melnikov & S.B. Turanov Comparison of concentration profile prediction for slurry transportation based on the diffusion theory L.J. Zhao CFG compound foundation in high-rise building design and application J.Z. Li, G.X. Fang & Q. Quan Design and construction of pile tip and pile lateral bored grouting X. Zhou, G.X. Fang, P. Zhang & Y.Q. Leng An approach for road region detection H. Fang, G.Q. Yang, J. Li, G.T. Shao, C.Y. Zhang & C.G. Fu A university e-learning system to enhance higher education teaching environments: A model-based innovative service-oriented clouds intensive evolution approach L. Wang & Z. Wang Coupled multiscale nonlinear dynamic analyses of Reinforced Concrete Shear Wall buildings I. Cho, S. Yemmaleni & I. Song Influence of river level fluctuation on the stability of high floodplains bank slope G.L. Tao, B.Z. Tan, J.Y. Fan, J. Ruan & Z.S. Yao Scour protection of the foundations of Offshore Wind Energy Converters V. Efimova, A. Karelov, A. Nesterov & N. Belyaev Vector field modeling of seismic soil movement in building footing Z. Tatiana & S. Pavel The effect of ocean flow on reconstruction accuracy in the test based on the NAH Q.W. He, P. Hu, X.W. Liu & S.C. Ding Effect of different modification methods on ground motions C.W. Jiang & D.B. Wang The effects of the effective support length of the stern bearing on ship shafting vibration transmission paths H.F. Li, Q.C. Yang, S.J. Zhu & X.W. Liu Development of a water-collecting device for collecting water at a certain depth Y.H. Chen, Y.P. Xu, J.B. Jiang, Z.T. Ni & X.L. Li An empirical analysis of the influence of international oil price's fluctuations on the exchange rate of RMB J. Deng & J.Q. He LQR control of seismic-excited tall building with ATMD Y.M. Kim, K.P. You, J.Y. You & D.K. Kim Use of nonconventional liquid fuel in heat power industry A. Lesnykh & K. Tcoy Economic evaluation of hydroconversion of fatty acid methyl ester into renewable liquid hydrocarbons A. Kantama, P. Narataruksa, C. Prapainainar & P. Hunpinyo DEM investigation of stress field in sand during pile penetration S. Liu & J. Wang The water saturation effects on dynamic tensile strength in red and buff sandstones studied with Split Hopkinson Pressure Bar (SHPB) E.H. Kim & D.B.M. de Oliveira Economic potential of diesel-like renewable fuel production from the by-product of the palm oil refining process A. Kantama, C. Prapainainar, P. Narataruksa & P. Hunpinyo Study on acoustic similarity in different fluids M. Wang, Q.D. Zhou, Y.F. Wang, G. Ji, J.B. Xie & Z.Y. Xie Influence of soil temperature conditions on linear construction stability E.E. Kholoden, S.A. Lobanov & O.M. Morina The effects of KH560 addition on brittle/ductile properties of glass fiber/epoxy resin composites J.S. Sun & J.G. Wang In vitro bioactivity evaluation of Co-Cr-Mo (F-75)/HAP composites N.M.S. Adzali, S.B. Jamaludin & M.N. Derman Formation of nanostructured Ti-Ni-Hf-Cu coatings by high-speed flame spraying of mechanically activated powders P.O. Rusinov & Zh.M. Blednova Synthesis of pure zeolite NaP from kaolin and enhancement of crystallization rate by sodium fluoride J.T. Li, X. Zeng, R.Y. Chen, X.B. Yang & X.T. Luo Formation of copper oxide nanostructures by solution-phase method for antibacterial application C.M. Pelicano, J.C. Felizco & M.D. Balela A method of load extrapolation based on the MCMC and POT S. You, Y.Q. Wu, Y. Li & Y.S. Zhang A planar four-bar mechanism demonstrator with variable bar length and connecting rod curve drawing L.N. Gao, H.Y. Tang & C. Yang Influence of dynamic force on the vibration of the micro-machine tool spindle M. Guo, B. Li, J. Yang & S.Y. Liang Research of the IEEE802.11a channel coding technology based on Turbo code Z.Y. Sun, L.Y. Liu & Y. Zhang Stability analysis of single-layer hyperbolic shallow lattice shell with different grid reinforcements Z.Y. Zhang, H.Y. Wei, X. Zhao & X. Qin Extending stress linearization procedures for direct method design in pressure vessel design H.J. Li, X. Huang & H. Yang Statistical description of fracture pattern from single particle crushing test B. Zhao, J. Wang & H. Zhao Channel allocation algorithm in multi-hop cellular network based on potential game Z.Y. Sun, Y. Zhang & L.Y. Liu Electroosmotic flow through a microchannel containing salt-free power-law fluids S.H. Chang Electrochemical study of Cu nanowire growth in aqueous solution J.C. Felizco & M.D. Balela Effects of synthesis techniques and initial reagents on compositions and particle morphology of hydroxyapatite O. Jongprateep & C. Nueangjumnong Synthesis and characterization of Fe-Sn nanoparticles via the galvanic replacement method E.R. Magdaluyo Jr., A.L. Bachiller & P.J. Nisay Numerical study of micro-reactor inlet geometry for Fischer-Tropsch Synthesis W. Chaiwang, A. Theampetch, P. Narataruksa & C. Prapainainar The efficiency of improving the blade finishing treatment M. Yu Kulikov, V.E. Inozemtsev, A.A. Bocharov & N.O. Myo Study on the hyperbolic sine function creep model H. Chen, H.D. Jiang & H.Y. Chen The calculation and decomposition of embodied energy in Sino-Korean trade: Based on technological heterogeneity X. Zhang & W.R. Huang Design of software for orthogonal packing problems V.A. Chekanin & A.V. Chekanin Flow-induced noise analysis of pipes with variable cross-sections W. Zhao, Y.O. Zhang & Z.L. Guo Study and simulation on impact of wind turbine generators on Low Frequency Oscillations in power system J.R. Xu, F. Tang, Q. Zhang, T. Zhao & Q.X. Wang EMD-based event analysis for identifying the influence of the "2008 Financial Crisis" on silver price L. Chao & S. Yu Evaluation of metallurgical parameters of Brazilian lump iron ores with three distinct typologies J.J. Mendes, A.A. Cunha, F.G. da S. Araujo, F.L. von Kruger & R.A. Llobell Sole The issue of balancing of eccentric-type vibrators I.M. Yefremov, D.V. Lobanov & K.N. Figura Comparison between the effects of thoracoscopy and open thoracotomy on elderly patients with lung cancer F.W. Lin, K.P. Cheng, C. Zhang & Y. Zhao Territory of mining-industrial development as an object of recreation in the Far East federal region L.T. Krupskaya, V.P. Zvereva, A.V. Leonenko & N.G. Volobueva Validation of a temperature parameter in the expression for the efficiency of filtering magnetophoresis A.A. Sandulyak, D.A. Sandulyak, M.V. Shitikova, Y.A. Rossikhin, A.V. Sandulyak & V.S. Semenov Multi-focus fusion with a new sharpness parameter for textile testing J.F. Zhou & R.W. Wang A novel three-dimensional reconstruction algorithms for nonwoven fabrics based on sequential two-dimensional images L.J. Yu & R.W. Wang The effect of volume variation of silver nanoparticle solution towards the porosity and compressive strength of mortar H.S.A. Tina, A. Andreyani & W.S.B. Dwandaru Design and implementation of reversible DC speed control system with logic non circulating current L.N. Gao & S.Q. Yi Effect of the plain-woven fabrics on mechanical properties of composites S. Tanpichai, K. Kaew-in & P. Potiyaraj Reactively modified poly(butylene succinate) as a compatibilizer for PBS composites V. Tansiri & P. Potiyaraj Preparation and characterization of Ag-Bi1.5Y0.3Sm0.2O3 composite cathode C.H. Hua & C.C. Chou Formation of silver nanowires in ethylene glycol for transparent conducting electrodes N. De Guzman & M.D. Balela Study on the wave-truss composite bridge design Y. Li, C.L. Zhu & X.X. Zha The transient stability analysis based on WAMS and online admittance parameter identification H.Z. Zhou, F. Tang, J. Jia & S.L. Ye Polymer composites with ferrocene derivatives for fire-safe construction A.A. Askadsky, V.A. Ushkov & V.A. Smirnov Weight optimized main landing gears for UAV under impact loading for evaluation of explicit dynamics study R.F. Swati, A.A. Khan & L.H. Wen Analysis of the influence factors of carbon emissions based on the LMDI approach-taking Jiangsu Province as an example X.Y. Wang & S.Y. Jiang Impedance characteristics of laboratory scale molten carbonate fuel cell fueled by ash free coal S.W. Lee, T.K. Kim, Y.J. Kim, C.G. Lee & M. Wolowicz Purification of plasmid DNA from Escherichia coli lysate using superparamagnetic nanoparticles modified with amino functional groups X.L. Qiu, Y.P. Guan, K.K. Wang & C. Guo Nanomodified bitumen composites: Solvation shells and rheology E.V. Korolev, S.S. Inozemtcev & V.A. Smirnov Effects of the multi-step ausforming process on the microstructure evolution of nanobainite steel C. Zhi, A. Zhao, J. He, H. Yang & L. Qi
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
